Click image to view full size image
Before operating the probe, make sure there is no moisture in the detection area. Dry the detector with a cloth if necessary.
Press the start/stop button 5 to start the instrument:
After a short period of automatic testing, the probe is ready to run. The instrument automatically enters the function mode of metal detection. At this time, if there is a signal display in area 9 on the display screen without metal interference, it indicates that calibration is required. The calibration method is：Place the instrument in an environment free from metal and strong magnetic field interference (such as: Lifting the instrument into the air by hand, etc.), and then press and hold the detection metal button until the signal in area 9 of the display screen shows zero and the green light is on, and then the calibration is completed. At this time, release the button to detect the metal work.
As one of the most professional metal wall detector manufacturers in China, we're featured by quality products and customized service. Please rest assured to buy metal wall detector at competitive price from our factory.
Process quality control (IPQC)
The company pays special attention to process quality control:
1.Production line has special inspection (IPQC) to confirm the first piece of workshop production, process audit, sampling inspection, to ensure that the whole production process meets the requirements..
2. Semi-finished products of the production line shall pass the online QC 100% inspection before flowing into the next process.
3. The inspection procedure is shown as follows
http://www.makatechnologies.com/